Pricilla Mooseburger Originals

Main Entrance | View Shopping Cart | Place Order | Help

Part 7067p - Jim Howle Nose Putty
Is your clown nose too big to fit your own nose? No problem! Jim Howle's Putty is the perfect solution. Container holds a ping-pong ball sized glob (22 grams), which should last you a long, long time.
For best results, first wipe your nose, clown nose, and hands with alcohol on a paper towel to take off all the makeup, oil, and dirt, sweat. Pull off a little bit of the putty and knead it until it sticks annoyingly to your fingers. Hold the nose upside down and fill the top (the part that is closest to the bridge of your nose) and work it half-way down the sides. Try it on and keep packing more until you have the fit you want. Try NOT to put any Putty in the very front or bottom -- this will shift the weight in the nose and may make it fall off.
To remove: just dab the main glob of remaining Putty to lift off the used stuff and store back in container -- the Putty can be re-used over and over again as long as you keep the container tightly closed. If you can take the time to use the Putty correctly, you will REALLY like its properties!
Price: $10.00
Enter quantity
to cart

Part 7067s - Jim Howle's "THIS" Adhesive (Non-Latex)
This 1.25 oz. bottle has an easy applicator tip and contains a great NON-LATEX glue made by Jim Howle to be used with his noses.
For best results, wipe your nose with alcohol to remove any oil that may prevent optimum adhesion. Shake bottle first and place a drop of adhesive inside the clown nose and smear it around. Put it on and then remove it; set it aside to dry. Then rub a drop on your own nose and rub it in. Let dry for 5 minutes before putting your clown nose back on. To remove, just rub it off with your fingers. Easy to clean with a baby wipe.
Price: $10.00
Enter quantity
to cart

Part 7067t - Jim Howle's "THAT" Restickable Adhesive (Non-Latex)
If your nose is a well-fitting one, "THAT" glue will work the best. The NON-LATEX formula has a special restickable ability which allows you to remove and reattach the nose several times without having to reapply the glue. So this 1.25 oz. bottle goes a long way!
For best results, wipe your nose with alcohol to remove any oil that may prevent optimum adhesion. Place a drop of adhesive inside the clown nose and smear it where it will do the most good. Rub a drop on your own nose and rub it in. Let dry for 5 minutes before putting your clown nose on. Leave the glue inside the nose as long as it works...then add a little more when the old stuff stops working -- simple as that! Easy to clean with a baby wipe.
Price: $10.00
Enter quantity
to cart

Part 7067o - Jim Howle's "THE OTHER" Adhesive (Latex)
This 1.25 oz. bottle has an easy applicator tip and contains a Latex-based great glue made by Jim Howle to be used with his noses.
For best results, wipe your nose with alcohol to remove any oil that may prevent optimum adhesion. Shake bottle first and place a drop of adhesive inside the clown nose and smear it around. Put it on and then remove it; set it aside to dry. Then rub a drop on your own nose and rub it in. Let dry for 5 minutes before putting your clown nose back on. It will dry clear.
To remove, just rub it off with your fingers. Easy to clean with a baby wipe.
Price: $10.00
Enter quantity
to cart

Part 7047 - Double Stick Tape
Mehron double stick tape is great for sticking on clown noses, eyebrows, and Santa wigs and beards. The 1x3" medical grade adhesive strips are perfect for folks allergic to or bothered by glue. Contains 12 strips of tape.
Price: $4.00
Enter quantity
to cart

Part 7043 - Spirit gum
Spirit Gum adhesive is perfect for attaching light weight items such as nose tips, sponge noses, and crepe hair. Glass bottle contains 0.25 ounces (7 ml). Cap has attached brush.
Price: $4.00
Enter quantity
to cart

Part 7007 - Liquid Latex
Liquid latex is a perfect light weight glue for attaching small noses, rhinestones and eyelashes. 1 oz. bottle comes with convenient brush attached inside the lid.
Price: $4.25
Enter quantity
to cart

Part 7031 - Skin Bond - "Osto-Bond"
Osto-Bond brand Skin Bond latex adhesive is the strongest bonding nose glue available (this stuff is medical-grade, baby!). It is perfect for clowns who perspire greatly and need a high performance glue to keep noses in place. Convenient brush in bottle for easy application. Sturdy metal canister contains 4 ounces. Can be easily removed with Uni-Solve Remover. PLEASE NOTE: Contains natural rubber latex, which may cause allergic reactions.
Price: $18.00
Enter quantity
to cart

Next 0 1 2 3 4 5

Having Trouble with your Shopping Cart? Click Here!